宇航计测技术 ›› 2012, Vol. 32 ›› Issue (4): 10-13.doi: 10.12060/j.issn.1000-7202.2012.04.03

• 论文 • 上一篇    下一篇

基于VP的虚拟试验系统仿真设计

王丹丹1;陈小军1;赵雯1;徐博2   

  1. 1、北京宇航系统工程研究所，北京 100076；
    2、哈尔滨工程大学自动化学院，哈尔滨 150001
  • 出版日期:2012-08-15 发布日期:2012-08-15
  • 作者简介:王丹丹（1962-），女，研究员，主要研究方向：初始对准技术研究。

The Simulation Design of Virtual Experiment System Based on VP

WANG Dan-dan1;CHEN Xiao-jun1;ZHAO Wen1;XU Bo2   

  1. 1、The institute of Aerospace system engineering Beijing, Beijing 100076；
    2、The Automation Department, Harbin Engineering University，Harbin 150001
  • Online:2012-08-15 Published:2012-08-15

PDF (PC)

摘要： 虚拟试验系统的目的是通过虚拟试验真实反映飞行器的起竖过程，为瞄准技术的误差分析提供良好的仿真基础和设计依据。对飞行器机动发射的起竖过程进行建模，在数学模型基础上，通过三维可视化仿真技术模拟发射前的整个起竖过程，初步完成虚拟试验过程可视化系统的研制,建立虚拟试验系统中飞行器、车、发射场等三维模型，实现了人机交互功能，建立了系统仿真平台。

关键词: 虚拟试验, 模拟平台, 三维模型

Abstract: The goal of virtual experiment system is to supply right simulation base and design gist for error analysis by virtual experiment, which reveals the process of erecting aircrafts. The model is fabricated which reveals the setting up process of aircraft launch. Based on the mathematic model, the whole erecting process was imitated by the simulation technology of three-dimensional vision technology. The development of vision system of virtual experiment is finished. The three-dimensional model which includes aircraft, camion, concourse in virtual experiment system and simulation flat are constructed.

Key words: Virtual experiment, Simulation flat, Three dimensional model

京ICP备09048426号-4　 京公网安备 11010602060144号　版权所有 © 《宇航计测技术》编辑部